#! /usr/libexec/platform-python
"""Base16, Base32, Base64 (RFC 3548), Base85 and Ascii85 data encodings"""
# Modified 04-Oct-1995 by Jack Jansen to use binascii module
# Modified 30-Dec-2003 by Barry Warsaw to add full RFC 3548 support
# Modified 22-May-2007 by Guido van Rossum to use bytes everywhere
# Legacy interface exports traditional RFC 2045 Base64 encodings
'encode', 'decode', 'encodebytes', 'decodebytes',
# Generalized interface for other encodings
'b64encode', 'b64decode', 'b32encode', 'b32decode',
'b16encode', 'b16decode',
# Base85 and Ascii85 encodings
'b85encode', 'b85decode', 'a85encode', 'a85decode',
# Standard Base64 encoding
'standard_b64encode', 'standard_b64decode',
# Some common Base64 alternatives. As referenced by RFC 3458, see thread
# http://zgp.org/pipermail/p2p-hackers/2001-September/000316.html
'urlsafe_b64encode', 'urlsafe_b64decode',
bytes_types = (bytes, bytearray) # Types acceptable as binary data
def _bytes_from_decode_data(s):
except UnicodeEncodeError:
raise ValueError('string argument should contain only ASCII characters')
if isinstance(s, bytes_types):
return memoryview(s).tobytes()
raise TypeError("argument should be a bytes-like object or ASCII "
"string, not %r" % s.__class__.__name__) from None
# Base64 encoding/decoding uses binascii
def b64encode(s, altchars=None):
"""Encode the bytes-like object s using Base64 and return a bytes object.
Optional altchars should be a byte string of length 2 which specifies an
alternative alphabet for the '+' and '/' characters. This allows an
application to e.g. generate url or filesystem safe Base64 strings.
encoded = binascii.b2a_base64(s, newline=False)
assert len(altchars) == 2, repr(altchars)
return encoded.translate(bytes.maketrans(b'+/', altchars))
def b64decode(s, altchars=None, validate=False):
"""Decode the Base64 encoded bytes-like object or ASCII string s.
Optional altchars must be a bytes-like object or ASCII string of length 2
which specifies the alternative alphabet used instead of the '+' and '/'
The result is returned as a bytes object. A binascii.Error is raised if
If validate is False (the default), characters that are neither in the
normal base-64 alphabet nor the alternative alphabet are discarded prior
to the padding check. If validate is True, these non-alphabet characters
in the input result in a binascii.Error.
s = _bytes_from_decode_data(s)
altchars = _bytes_from_decode_data(altchars)
assert len(altchars) == 2, repr(altchars)
s = s.translate(bytes.maketrans(altchars, b'+/'))
if validate and not re.match(b'^[A-Za-z0-9+/]*={0,2}$', s):
raise binascii.Error('Non-base64 digit found')
return binascii.a2b_base64(s)
def standard_b64encode(s):
"""Encode bytes-like object s using the standard Base64 alphabet.
The result is returned as a bytes object.
def standard_b64decode(s):
"""Decode bytes encoded with the standard Base64 alphabet.
Argument s is a bytes-like object or ASCII string to decode. The result
is returned as a bytes object. A binascii.Error is raised if the input
is incorrectly padded. Characters that are not in the standard alphabet
are discarded prior to the padding check.
_urlsafe_encode_translation = bytes.maketrans(b'+/', b'-_')
_urlsafe_decode_translation = bytes.maketrans(b'-_', b'+/')
def urlsafe_b64encode(s):
"""Encode bytes using the URL- and filesystem-safe Base64 alphabet.
Argument s is a bytes-like object to encode. The result is returned as a
bytes object. The alphabet uses '-' instead of '+' and '_' instead of
return b64encode(s).translate(_urlsafe_encode_translation)
def urlsafe_b64decode(s):
"""Decode bytes using the URL- and filesystem-safe Base64 alphabet.
Argument s is a bytes-like object or ASCII string to decode. The result
is returned as a bytes object. A binascii.Error is raised if the input
is incorrectly padded. Characters that are not in the URL-safe base-64
alphabet, and are not a plus '+' or slash '/', are discarded prior to the
The alphabet uses '-' instead of '+' and '_' instead of '/'.
s = _bytes_from_decode_data(s)
s = s.translate(_urlsafe_decode_translation)
# Base32 encoding/decoding must be done in Python
_b32alphabet = b'ABCDEFGHIJKLMNOPQRSTUVWXYZ234567'
"""Encode the bytes-like object s using Base32 and return a bytes object.
# Delay the initialization of the table to not waste memory
# if the function is never called
b32tab = [bytes((i,)) for i in _b32alphabet]
_b32tab2 = [a + b for a in b32tab for b in b32tab]
if not isinstance(s, bytes_types):
s = memoryview(s).tobytes()
# Pad the last quantum with zero bits if necessary
s = s + b'\0' * (5 - leftover) # Don't use += !
from_bytes = int.from_bytes
for i in range(0, len(s), 5):
c = from_bytes(s[i: i + 5], 'big')
encoded += (b32tab2[c >> 30] + # bits 1 - 10
b32tab2[(c >> 20) & 0x3ff] + # bits 11 - 20
b32tab2[(c >> 10) & 0x3ff] + # bits 21 - 30
b32tab2[c & 0x3ff] # bits 31 - 40
# Adjust for any leftover partial quanta
def b32decode(s, casefold=False, map01=None):
"""Decode the Base32 encoded bytes-like object or ASCII string s.
Optional casefold is a flag specifying whether a lowercase alphabet is
acceptable as input. For security purposes, the default is False.
RFC 3548 allows for optional mapping of the digit 0 (zero) to the
letter O (oh), and for optional mapping of the digit 1 (one) to
either the letter I (eye) or letter L (el). The optional argument
map01 when not None, specifies which letter the digit 1 should be
mapped to (when map01 is not None, the digit 0 is always mapped to
the letter O). For security purposes the default is None, so that
0 and 1 are not allowed in the input.
The result is returned as a bytes object. A binascii.Error is raised if
the input is incorrectly padded or if there are non-alphabet
characters present in the input.
# Delay the initialization of the table to not waste memory
# if the function is never called
_b32rev = {v: k for k, v in enumerate(_b32alphabet)}
s = _bytes_from_decode_data(s)
raise binascii.Error('Incorrect padding')
# Handle section 2.4 zero and one mapping. The flag map01 will be either
# False, or the character to map the digit 1 (one) to. It should be
# either L (el) or I (eye).
map01 = _bytes_from_decode_data(map01)
assert len(map01) == 1, repr(map01)
s = s.translate(bytes.maketrans(b'01', b'O' + map01))
# Strip off pad characters from the right. We need to count the pad
# characters because this will tell us how many null bytes to remove from
# the end of the decoded string.
# Now decode the full quanta
for i in range(0, len(s), 8):
acc = (acc << 5) + b32rev[c]
raise binascii.Error('Non-base32 digit found') from None
decoded += acc.to_bytes(5, 'big')
# Process the last, partial quanta
if l % 8 or padchars not in {0, 1, 3, 4, 6}:
raise binascii.Error('Incorrect padding')
last = acc.to_bytes(5, 'big')
leftover = (43 - 5 * padchars) // 8 # 1: 4, 3: 3, 4: 2, 6: 1
decoded[-5:] = last[:leftover]
# RFC 3548, Base 16 Alphabet specifies uppercase, but hexlify() returns
# lowercase. The RFC also recommends against accepting input case
"""Encode the bytes-like object s using Base16 and return a bytes object.
return binascii.hexlify(s).upper()
def b16decode(s, casefold=False):
"""Decode the Base16 encoded bytes-like object or ASCII string s.
Optional casefold is a flag specifying whether a lowercase alphabet is
acceptable as input. For security purposes, the default is False.
The result is returned as a bytes object. A binascii.Error is raised if
s is incorrectly padded or if there are non-alphabet characters present
s = _bytes_from_decode_data(s)
if re.search(b'[^0-9A-F]', s):
raise binascii.Error('Non-base16 digit found')
return binascii.unhexlify(s)
# Ascii85 encoding/decoding
def _85encode(b, chars, chars2, pad=False, foldnuls=False, foldspaces=False):
# Helper function for a85encode and b85encode
if not isinstance(b, bytes_types):
b = memoryview(b).tobytes()
words = struct.Struct('!%dI' % (len(b) // 4)).unpack(b)
chunks = [b'z' if foldnuls and not word else
b'y' if foldspaces and word == 0x20202020 else
(chars2[word // 614125] +
chars2[word // 85 % 7225] +
chunks[-1] = chars[0] * 5
chunks[-1] = chunks[-1][:-padding]
def a85encode(b, *, foldspaces=False, wrapcol=0, pad=False, adobe=False):
"""Encode bytes-like object b using Ascii85 and return a bytes object.
foldspaces is an optional flag that uses the special short sequence 'y'
instead of 4 consecutive spaces (ASCII 0x20) as supported by 'btoa'. This
feature is not supported by the "standard" Adobe encoding.
wrapcol controls whether the output should have newline (b'\\n') characters
added to it. If this is non-zero, each output line will be at most this
pad controls whether the input is padded to a multiple of 4 before
encoding. Note that the btoa implementation always pads.
adobe controls whether the encoded byte sequence is framed with <~ and ~>,
which is used by the Adobe implementation.
global _a85chars, _a85chars2
# Delay the initialization of tables to not waste memory
# if the function is never called
_a85chars = [bytes((i,)) for i in range(33, 118)]
_a85chars2 = [(a + b) for a in _a85chars for b in _a85chars]
result = _85encode(b, _a85chars, _a85chars2, pad, True, foldspaces)
result = _A85START + result
wrapcol = max(2 if adobe else 1, wrapcol)
chunks = [result[i: i + wrapcol]
for i in range(0, len(result), wrapcol)]
if len(chunks[-1]) + 2 > wrapcol:
result = b'\n'.join(chunks)
def a85decode(b, *, foldspaces=False, adobe=False, ignorechars=b' \t\n\r\v'):
"""Decode the Ascii85 encoded bytes-like object or ASCII string b.
foldspaces is a flag that specifies whether the 'y' short sequence should be
accepted as shorthand for 4 consecutive spaces (ASCII 0x20). This feature is
not supported by the "standard" Adobe encoding.
adobe controls whether the input sequence is in Adobe Ascii85 format (i.e.
is framed with <~ and ~>).
ignorechars should be a byte string containing characters to ignore from the
input. This should only contain whitespace characters, and by default
contains all whitespace characters in ASCII.
The result is returned as a bytes object.
b = _bytes_from_decode_data(b)
if not b.endswith(_A85END):
"Ascii85 encoded byte sequences must end "
"with {!r}".format(_A85END)
if b.startswith(_A85START):
b = b[2:-2] # Strip off start/end markers
# We have to go through this stepwise, so as to ignore spaces and handle
# special short sequences
packI = struct.Struct('!I').pack
decoded_append = decoded.append
curr_append = curr.append
if b'!'[0] <= x <= b'u'[0]:
acc = 85 * acc + (x - 33)
decoded_append(packI(acc))
raise ValueError('Ascii85 overflow') from None
raise ValueError('z inside Ascii85 5-tuple')
decoded_append(b'\0\0\0\0')
elif foldspaces and x == b'y'[0]:
raise ValueError('y inside Ascii85 5-tuple')
decoded_append(b'\x20\x20\x20\x20')
raise ValueError('Non-Ascii85 digit found: %c' % x)
result = b''.join(decoded)
# Throw away the extra padding
result = result[:-padding]
# The following code is originally taken (with permission) from Mercurial
_b85alphabet = (b"0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"
b"abcdefghijklmnopqrstuvwxyz!#$%&()*+-;<=>?@^_`{|}~")
def b85encode(b, pad=False):
"""Encode bytes-like object b in base85 format and return a bytes object.
If pad is true, the input is padded with b'\\0' so its length is a multiple of
global _b85chars, _b85chars2
# Delay the initialization of tables to not waste memory
# if the function is never called
_b85chars = [bytes((i,)) for i in _b85alphabet]
_b85chars2 = [(a + b) for a in _b85chars for b in _b85chars]
return _85encode(b, _b85chars, _b85chars2, pad)
"""Decode the base85-encoded bytes-like object or ASCII string b
The result is returned as a bytes object.
# Delay the initialization of tables to not waste memory
# if the function is never called
for i, c in enumerate(_b85alphabet):
b = _bytes_from_decode_data(b)
packI = struct.Struct('!I').pack
for i in range(0, len(b), 5):
acc = acc * 85 + _b85dec[c]
for j, c in enumerate(chunk):
raise ValueError('bad base85 character at position %d'
raise ValueError('base85 overflow in hunk starting at byte %d'
result = result[:-padding]
# Legacy interface. This code could be cleaned up since I don't believe
# binascii has any line length limitations. It just doesn't seem worth it
# though. The files should be opened in binary mode.
MAXLINESIZE = 76 # Excluding the CRLF
MAXBINSIZE = (MAXLINESIZE//4)*3
def encode(input, output):
"""Encode a file; input and output are binary files."""
s = input.read(MAXBINSIZE)
while len(s) < MAXBINSIZE:
ns = input.read(MAXBINSIZE-len(s))
line = binascii.b2a_base64(s)
def decode(input, output):
"""Decode a file; input and output are binary files."""
It is recommended that you Edit text format, this type of Fix handles quite a lot in one request
